Increase Internet Speed & boot speed

Internet speed

Open the "RUN" command
Type in the RUN "gpedit.msc" hit Enter button.
In the computer configuration section, select the "Administrative template" then "Network" then "Qos packet Scheduler" then "Limit Reservable bandwith".it may be not configured (default), so you need to make "Enable" & set the Bandwith limit 0%, default may be 20%, make it 0%, click Apply then ok. Thats all


Browser slow?
1) go to "start" then "RUN" type cmd, right click and choose run as administrator
2) on the CMD type: ipconfig/flushdns
3) reboot windows
That's all.



Increase the boot speed
Open the "RUN" command
Type in the RUN "msconfig" hit Enter button.
Click on the "boot" then "Advance options" here you need to increase the number of "NUM PROCESS" as many as possible. When you click on the arrow sign your computer will shoe you how many will you able to increase the number. (default may be 1)


Clean the Boot of XP
http://support.microsoft.com/kb/310353

Step 1: Start the System Configuration Utility
Click Start, click Run, type msconfig, and then click OK.
The System Configuration Utility dialog box is displayed.

Step 2: Configure selective startup options

In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup.
Click to clear the Process SYSTEM.INI File check box.
Click to clear the Process WIN.INI File check box.
Click to clear the Load Startup Items check box. Verify that Load System Services and Use Original BOOT.INI are checked.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
When you are prompted, click Restart to restart the computer.

Step 3: Log on to Windows
If you are prompted, log on to Windows.
When you receive the following message, click to select the Don't show this message or launch the System Configuration Utility when Windows start check box, and then click OK.

Notes
You have used the System Configuration Utility to make changes to the way Windows starts.
The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts.
Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the System Configuration Utility.

Step 4: Optional step to disable features
If the clean boot fixed the error, you do not have to perform this step.

Important If your problem is not fixed and you do have to follow this step, it permanently removes all restore points from your computer. The System Restore feature uses restore points to restore your computer to an earlier state. If you remove the restore points, you can no longer restore Windows to an earlier state.

This step temporarily disables Microsoft features such as Plug and Play, networking, event logging, and error reporting.

Click Start, click Run, type msconfig, and then click OK.
The System Configuration Utility dialog box is displayed.
Click the General tab, click to clear the Load System Services check box, and then click OK.
When you are prompted, click Restart to restart the computer.

If these steps helped you start your computer in a clean-boot state, you are finished. If these steps did not help, go to the “Next Steps” section. If you have to return your computer to a normal startup state, go to “Steps to configure Windows to use a Normal startup state”.

Steps to configure Windows to use a Normal startup state
After you used the clean boot to resolve your problem, you can follow these steps to configure Windows XP to start normally.

Click Start, and then click Run.
Type msconfig, and then click OK.
The System Configuration Utility dialog box is displayed.
Click the General tab, click Normal Startup - load all device drivers and services, and then click OK.
When you are prompted, click Restart to restart the computer.